View STP08CP05TTR_4125892.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STP08CP05
Low voltage, low current power 8-bit shift register
Preliminary Data
Features

Low voltage power supply down to 3V 8 constant current output channels Adjustable output current through external resistor Serial Data IN/Parallel data OUT 3.3V micro driver-able Output current: 5-100mA 30MHz clock frequency Available in high thermal efficiency TSSOP exposed pad ESD protection 2.5kV HBM, 200V MM
TSSOP16 SO-16 Dip-16 TSSOP16 (Exposed pad)
Description
The STP08CP05 is a monolithic, low voltage, low current, power 8-bit shift register designed for LED panel displays. The STP08CP05 contains a 8-bit serial-in, parallel-out shift register that feeds a 8-bit D-type storage register. In the output stage, eight regulated current sources were designed to provide 5-100mA constant current to drive the LEDs, the output current setup time is 10ns (typ), thus improving the system performance. The STP08CP05 is backward compatible in functionality and footprint with STP8C/L596. Through an external resistor, users can adjust the STP08CP05 output current, controlling in this way the light intensity of LEDs, in addition, user can adjust LED's brightness intensity from 0% to 100% via OE pin. The STP08CP05 guarantees a 20V output driving capability, allowing users to connect more LEDs in series. The high clock frequency, 30 MHz, also satisfies the system requirement of high volume data transmission. The 3.3V of voltage supply is useful for applications that interface with any micro from 3.3V. Compared with a standard TSSOP package, the TSSOP exposed pad increases heat dissipation capability by a 2.5 factor.
Table 1. Device summary
Order codes STP08CP05B1R STP08CP05MTR STP08CP05TTR STP08CP05XTTR Package DIP-16 SO-16 (Tape & Reel) TSSOP16 (Tape & Reel) TSSOP16 Exposed-Pad (Tape & Reel) Packaging 25 parts per tube 2500 parts per reel 2500 parts per reel 2500 parts per reel
June 2007
Rev 2
1/25
www.st.com 25
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
Contents
STP08CP05
Contents
1 Summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Pin connection and description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 3
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1 3.2 3.3 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 5 6 7
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Equivalent circuit and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Truth table and timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.1 7.2 Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Timing diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8 9 10 11
Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2/25
STP08CP05
Summary description
1
Summary description
Table 2. Typical current accuracy
Current accuracy Output voltage Between bits 1.3V 1.5% Between ICs 3% 20 to 100mA Output current
1.1
Pin connection and description
Figure 1. Connections diagram
Note:
The Exposed-pad is electrically not connected
Table 3. Pin description
PIN N 1 2 3 4 5-12 13 14 15 16 Symbol GND SDI CLK LE OUT 0-7 OE SDO R-EXT VDD Ground terminal Serial data input terminal Clock input terminal Latch input terminal Output terminal Output enable input terminal (active low) Serial data out terminal Constant current programming 5V Supply voltage terminal Name and function
3/25
Block diagram
STP08CP05
2
Figure 2.
Block diagram
Block diagram
4/25
STP08CP05
Maximum rating
3
Maximum rating
Stressing the device above the rating listed in the "Absolute Maximum Ratings" table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents.
3.1
Absolute maximum ratings
Table 4. Absolute maximum ratings
Symbol VDD VO IO IGND fCLK TOPR
TSTG
Parameter Supply voltage IGND Output voltage Output current GND terminal current Clock frequency Operating temperature range Storage temperature range
Value 0 to 7 -0.5 to 20 100 800 50 -40 to +125 -55 to +150
Unit V V mA mA MHz C C
3.2
Thermal data
Table 5. Thermal data
Symbol RthJA Parameter Thermal resistance junction-ambient DIP-16 SO-16 TSSOP-16 60 75 85 TSSOP-16 (1) (exposed pad) 37.5 Unit C/W
1. The Exposed-Pad should be soldered to the PBC to realize the thermal benefits
5/25
Maximum rating
STP08CP05
3.3
Recommended operating conditions
Table 6. Recommended operating conditions
Symbol VDD VO IO IOH IOL VIH VIL twLAT twCLK twEN Parameter Supply voltage Output voltage Output current Output current Output current Input voltage Input voltage LE pulse width CLK pulse width OE pulse width VDD = 3.0 to 5.0V OUTn SERIAL-OUT SERIAL-OUT 0.7VDD -0.3 20 20 200 7 4 15 Cascade operation (1) 30 5 Test conditions Min 3.0 Typ Max 5.5 20 100 +1 -1 VDD+0.3 0.3VDD Unit V V mA mA mA V V ns ns ns ns ns ns MHz
tSETUP(D) Setup time for DATA tHOLD(D) Hold time for DATA tSETUP(L) Setup time for LATCH fCLK Clock frequency
1. In order to achieve high cascade data transfer,please consider tr/tf timings carefully.
6/25
STP08CP05
Electrical characteristics
4
Electrical characteristics
Table 7. Electrical characteristics (VDD=3.3V to 5V, T = 25C, unless otherwise specified.)
Symbol VIH VIL IOH VOL VOH IOL1 IOL2 IOL3 IOL1 IOL2 IOL3 RSIN(up) Output current error between bit (All Output ON) Pull-up resistor Output current Parameter Input voltage high level Input voltage low level Output leakage current Output voltage (Serial-OUT) Output voltage (Serial-OUT) VOH = 20V IOL = 1mA IOH = -1mA VO = 0.3V, Rext = 3.9k VO = 0.3V, Rext = 970 VO = 1.3V, Rext = 190 VO = 0.3VREXT = 3.9k VO = 0.3VREXT = 970 VO = 1.3VREXT =190 150 100 REXT = 980 OUT 0 to 7 = OFF Supply current (OFF) IDD(OFF2) IDD(ON1) Supply current (ON) IDD(ON2) Thermal Thermal protection (1) REXT = 250 OUT 0 to 7 = ON 11.7 170 13.5 C REXT = 250 OUT 0 to 7 = OFF REXT = 980 OUT 0 to 7 = ON 11.2 4.5 13.5 mA 5 VOH - VDD =- 0.4V 4.25 19.4 97 5 20 100 5 1.5 1.2 300 200 4 5.75 20.6 103 8 2.75 2.5 600 400 5 K K % mA Test conditions Min 0.7VDD GND 0.5 0.03 Typ Max VDD 0.3VDD 10 0.4 Unit V V A V V
RSIN(down) Pull-down resistor IDD(OFF1)
1. Guaranteed by desing (not tested) The thermal protection switches OFF only the outputs
7/25
Switching characteristics
STP08CP05
5
Switching characteristics
Table 8. Switching characteristics (VDD = 5V, T = 25C, unless otherwise specified.)
Symbol tPLH1 Parameter Propagation delay time, CLK-OUTn, LE = H, OE = L Propagation delay time, LE -OUTn, OE = L Propagation delay time, OE -OUTn, LE = H Propagation delay time, CLK-SDO Propagation delay time, CLK-OUTn, LE = H, OE = L Propagation delay time, LE -OUTn, OE = L Propagation delay time, OE -OUTn, LE = H Propagation delay time, CLK-SDO Output rise time 10~90% of voltage waveform Output fall time 90~10% of voltage waveform CLK rise time (1) CLK fall time (1) Test conditions VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 3.3 V VIL = GND IO = 20mA REXT = 1K VIH = VDD CL = 10pF VL = 3.0 V RL = 60 VDD = 5V VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 5V VDD = 3.3V VDD = 5V Min Typ 35 18 48 30 55 36 7 4 10 7 24 20 20 17 22 18 25 10 5 4 Max 70 ns 35 90 ns 60 110 ns 75 14 ns 8 20 ns 14 50 ns 40 40 ns 35 30 ns 25 60 ns 25 15 ns 12 5000 5000 ns ns Unit
tPLH2
tPLH3
tPLH
tPHL1
tPHL2
tPHL3
tPHL
tON
tOFF tr tf
1. In order to achieve high cascade data transfer, please consider tr/tf timings carefully.
8/25
STP08CP05
Equivalent circuit and outputs
6
Equivalent circuit and outputs
Figure 3. OE terminal
Figure 4.
LE terminal
Figure 5.
CLK, SDI terminal
9/25
Equivalent circuit and outputs Figure 6. SDO terminal
STP08CP05
10/25
STP08CP05
Truth table and timing diagram
7
7.1
Truth table and timing diagram
Truth table
Table 9. Truth table
Clock LE H OE L SDI Dn OUT0 ........ OUT0 ........ OUT7 Dn ..... Dn -5 ..... Dn -7 SDO Dn -7
L
L
Dn + 1
No Change
Dn -7
H
L
Dn + 2
Dn +2 ..... Dn -3 ..... Dn -5
Dn -5
X
L
Dn + 3
Dn +2 ..... Dn -3 ..... Dn -5
Dn -5
X
H
Dn + 3
OFF
Dn -5
Note:
OUT0 to OUT7 = ON when Dn = H; OUT0 to OUT7 = OFF when Dn = L.
11/25
Truth table and timing diagram
STP08CP05
7.2
Timing diagram
Figure 7. Timing diagram
Figure 8.
Clock, serial-in, serial-out
12/25
STP08CP05 Figure 9. Clock, serial-in, latch, enable, outputs
Truth table and timing diagram
Figure 10. Outputs
13/25
Typical characteristics
STP08CP05
8
Typical characteristics
Figure 11. Output current-REXT resistor
8000 7000 6000 Rext (Ohm) 5000 4000 3000 2000 1000 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ouput Current (mA)
Table 10. Output current-REXT resistor
Output Current (mA) Rext () 3 6740 5 3930 10 1913 20 963 50 386 80 241 130 124
14/25
STP08CP05 Figure 12. Power dissipation vs temperature package
Typical characteristics
Note:
The Exposed-Pad should be soldered to the PBC to realize the thermal benefits.
15/25
Test circuit
STP08CP05
9
Test circuit
Figure 13. DC characteristics
Figure 14. AC characteristics
16/25
STP08CP05
Package mechanical data
10
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
17/25
Package mechanical data
STP08CP05
Plastic DIP-16 (0.25) MECHANICAL DATA
mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 TYP. MAX. inch
P001C
18/25
STP08CP05
Package mechanical data
TSSOP16 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b c D E E1 e K L 0 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8 0.75 0 0.018 0.024 1 TYP MAX. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8 0.030 0.004 0.039 MIN. TYP. MAX. 0.047 0.006 0.041 0.012 0.0079 0.201 0.260 0.176 inch
A
A2 A1 b e K c L E
D
E1
PIN 1 IDENTIFICATION
1
0080338D
19/25
Package mechanical data
STP08CP05
TSSOP16 EXPOSED PAD MECHANICAL DATA
mm. DIM. MIN. A A1 A2 b c D D1 E E1 E2 e K L 0 0.45 0.60 0.8 0.19 0.09 4.9 1.7 6.2 4.3 1.5 0.65 8 0.75 0 0.018 0.024 6.4 4.4 6.6 4.5 5 1 TYP MAX. 1.2 0.15 1.05 0.30 0.20 5.1 0.031 0.007 0.004 0.193 0.067 0.244 0.169 0.059 0.0256 8 0.030 0.252 0.173 0.260 0.177 0.197 0.004 0.039 MIN. TYP. MAX. 0.047 0.006 0.041 0.012 0.0089 0.201 inch
7419276A
20/25
STP08CP05
Package mechanical data
Tape & Reel TSSOP16 MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 6.7 5.3 1.6 3.9 7.9 12.8 20.2 60 22.4 6.9 5.5 1.8 4.1 8.1 0.264 0.209 0.063 0.153 0.311 TYP MAX. 330 13.2 0.504 0.795 2.362 0.882 0.272 0.217 0.071 0.161 0.319 MIN. TYP. MAX. 12.992 0.519 inch
21/25
Package mechanical data
STP08CP05
SO-16 MECHANICAL DATA
DIM. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm. MIN. TYP MAX. 1.75 0.25 1.64 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.010 0.063 0.018 0.010
0016020D
22/25
STP08CP05
Package mechanical data
Tape & Reel SO-16 MECHANICAL DATA
mm. DIM. MIN. A C D N T Ao Bo Ko Po P 6.45 10.3 2.1 3.9 7.9 12.8 20.2 60 22.4 6.65 10.5 2.3 4.1 8.1 0.254 0.406 0.082 0.153 0.311 TYP MAX. 330 13.2 0.504 0.795 2.362 0.882 0.262 0.414 0.090 0.161 0.319 MIN. TYP. MAX. 12.992 0.519 inch
23/25
Revision history
STP08CP05
11
Revision history
Table 11. Revision history
Date 23-May-2007 28-Jun-2007 Revision 1 2 First release Updated Table 7 on page 7 Changes
24/25
STP08CP05
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
25/25

▲Up To Search▲

Price & Availability of STP08CP05TTR

	To Download STP08CP05TTR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .